× 分享到微信朋友圈
product center

contact
Transmission: 0577-8868 8270
Post box: rtv@zjrtfm.com
External trade department: 0577-8588 8220
0577-8588 8221
E-mail: valve@zjrtfm.com
monica@zjrtfm.com
Address: www.dekainu.com
Address: Block B-16, Airport New Area, Longwan District, Wenzhou City, Zhejiang Province (Jinhai Erdao 11 Road)

High platform stainless steel ball valve

The release date:[2020-05-13]     hits

Stainless steel ball valve and plug valve is the same type of valve, only its closing part is a ball, the ball around the center of the valve body to rotate to open, close a valve.

The working principle of stainless steel ball valve is to make the valve open or closed by rotating the spool. Stainless steel ball valve switch light, small volume, can be made into a large diameter, reliable sealing, simple structure, easy maintenance, sealing surface and sphere often in the closed state, not easy to be medium erosion, in all industries have been widely used.

Sealing conditions of stainless steel ball valve:

To ensure that the stainless steel ball valve meets the specified sealing requirements, the pressure of the medium must be used to push the ball (floating ball valve) or the sealing seat (fixed ball valve) to produce a small displacement, so that the surface of the sealing seat has a certain elastoplastic deformation, forming the necessary sealing pressure. If the seal pressure is too high, the seal seat will be damaged when the seal pressure exceeds the allowable pressure of the material, and the seal will fail. In addition, the operating torque will be increased and the performance will be affected. If it is too low, the elastoplastic deformation on the surface of the seal seat will not be enough to compensate for the machining error of the ball, resulting in the failure of the main seal to meet the required seal requirements.

Stainless steel ball valves generally have reduced diameter and not reduced diameter channel two structures. No matter the type of structure, the flow resistance coefficient of the ball valve is relatively small.

In particular, the so-called full flow type, that is, do not shrink the diameter of the ball valve, because its channel diameter is equal to the pipe diameter, local resistance loss only the same length of the pipe friction resistance, that is, in all valves, the ball valve flow resistance is smaller. In a rocket launch and its test system, the less resistance required to deliver the pipeline, the better.

There are two ways to reduce the resistance of the pipeline system: one is to reduce the flow rate of the fluid, so it is necessary to increase the diameter of the pipe and valve, which often has an adverse effect on the economy of the pipeline system, especially on the low-temperature conveying system (liquid hydrogen).


Contact us

Pursue the high quality of products and services, strive to realize the sincere and effective communication with customers, constantly dream, run and take off

Online message

title
content
content

Post box: rtv@zjrtfm.com
The ministry of foreign trade:0577-8588 8220 / 0577-8588 8221
E-mail: valve@zjrtfm.com / monica@zjrtfm.com
Web site: www.dekainu.com
Address:Block B-16, Airport New Area, Longwan District, Wenzhou City, Zhejiang Province (Jinhai Erdao 11 Road)

ag亚游开户