× 分享到微信朋友圈
product center

contact
Transmission: 0577-8868 8270
Post box: rtv@zjrtfm.com
External trade department: 0577-8588 8220
0577-8588 8221
E-mail: valve@zjrtfm.com
monica@zjrtfm.com
Address: www.dekainu.com
Address: Block B-16, Airport New Area, Longwan District, Wenzhou City, Zhejiang Province (Jinhai Erdao 11 Road)

Stainless steel ball valve

The release date:[2020-05-13]     hits

The working principle of stainless steel ball valve is to make the valve open or closed by rotating the spool. Stainless steel ball valve switch light, small volume, can be made into a large diameter, reliable sealing, simple structure, easy maintenance, sealing surface and sphere often in the closed state, not easy to be medium erosion, in all industries have been widely used.

Stainless steel ball valve in the pipeline is mainly used to cut off, distribution and change the flow direction of the medium. Stainless steel ball valve is widely used as a new type of valve.

Method of reassembly of stainless steel ball valves

L Clean and inspect removed parts. Replacement of seat and cover gaskets with spare parts kit is strongly recommended

L Assemble in the reverse order of disassembly.

L Cross-lock flange connection bolts (5) with specified torque.

L Lock stem nut with specified torque (13)

L After installing the actuator, input the corresponding signal to drive the spool to rotate by rotating the valve stem to make the valve to open and close positions.

L If possible, perform pressure seal and performance tests on the valve in accordance with relevant standards before reloading the pipe.

Although the stainless steel ball valve has a long use time and a very long maintenance free period and other characteristics, but also in the daily use to pay more attention to maintenance and maintenance, the following is to introduce the stainless steel ball valve maintenance and maintenance methods.

First of all, stainless steel ball valve before disassembly should be the ball valve upstream and downstream channel is removed pressure problem to determine, in the breakdown and assembly must prevent the loss of parts sealing surface, especially non-metallic parts, should use special tools to take out the o-ring.


Contact us

Pursue the high quality of products and services, strive to realize the sincere and effective communication with customers, constantly dream, run and take off

Online message

title
content
content

Post box: rtv@zjrtfm.com
The ministry of foreign trade:0577-8588 8220 / 0577-8588 8221
E-mail: valve@zjrtfm.com / monica@zjrtfm.com
Web site: www.dekainu.com
Address:Block B-16, Airport New Area, Longwan District, Wenzhou City, Zhejiang Province (Jinhai Erdao 11 Road)

ag亚游开户